TAKE THE ARTICULATED HYDRAULIC TRUCK CRANE EXAM, GOOD LUCK!
1. Question
What is a Crane Loader?
Both are correct
One truck-mounted articulated hydraulic crane
A crane consisting of a column rotating on a base, and an arm system attached to the top of the column.
2. Question
There are different types of loader crane assemblies, which are:
Crane mounted behind the cab, Crane mounted at the rear, Crane mounted in the middle.
Crane mounted behind the cab and Crane mounted in the centre.
3. Question
In the event of an accident at work...
We will look for a partner, to take him to the nearest hospital.
We will need to call an ambulance
The injured person must be transported immediately by crane.
4. Question
Who is responsible for the general maintenance of the Crane Loader:
Worker
Both are correct
Employer
5. Question
It is the responsibility of the driver:
React quickly to visual, auditory or movement aggression.
Both are correct
Knowledge of crane controls, functions and mechanics.
6. Question
In the event of accidental contact of the shaft or cables with a live power line, the crane operator must, as a general rule:
Leave the zone of influence only by jumping and keeping legs closed.
Warn surrounding persons and encourage them to keep a safe distance.
Before rescuing persons in the electrical circuit, it is necessary to disconnect the line in conduction.
All are correct.
7. Question
The emergency stop button is...
This is a safety device which, when activated, instantly blocks all movements of the crane and must be installed in all control stations.
This is a safety device which, when activated, blocks all movements of the crane, but it is not mandatory for all control positions.
8. Question
In the work area, is it important to maintain the cleanliness of the areas?
Yes, it is necessary to maintain a good state of cleanliness of the areas.
Yes, maintenance will be the responsibility of the cleaning services.
9. Question
What kind of action should we take if the load monitor frequently switches on and off due to a power failure?
Continue the manoeuvre until the manoeuvre is completed.
Switch off the load limiter.
Stop the manoeuvre and inform the person in charge of the work or activity, complying at all times with safety regulations.
Have the crane serviced by a maintenance company.
10. Question
What is the stability coefficient?
A general parameter.
A base-related parameter.
A loading parameter.
A dimensional parameter.
11. Question
Do we need to know the weight of the load?
Not necessary, although it is recommended to know the weight of the load.
Yes, the weight of the load must be known. If there is no data on the load, the load must be calculated and estimated.
12. Question
The Operator shall carry out periodic checks:
Yes, the condition of the machine should be checked daily before use.
No, as manufacturers do not require regular checks.
13. Question
What is a crane mounted on special bases?
One whose base is moved by chains.
One whose base is moved by devices other than wheels or chains.
One whose base is moved by wheels.
One whose base is moved by wheels or chains.
14. Question
If we carry out work near power lines...
The distance shall not be less than 5 metres.
No distance should be left, just avoid touching the power lines.
15. Question
Whose responsibility is it to train the truck hydraulic crane operator?
It is the Labour Inspectorate
It is the worker
It is the employer
💬 ¿Necesitas ayuda?
1
WhatsApp
¡Hola! 👋
Nuestro servicio de atención está disponible
24/7
.
Si tienes cualquier consulta,
deja tu mensaje y
te responderemos enseguida
.
Academia Fór-mate
Abrir WhatsApp