TAKE THE ARTICULATED HYDRAULIC TRUCK CRANE EXAM, GOOD LUCK!
1. Question
In the event of accidental contact of the shaft or cables with a live power line, the crane operator must, as a general rule:
All are correct.
Before rescuing persons in the electrical circuit, it is necessary to disconnect the line in conduction.
Warn surrounding persons and encourage them to keep a safe distance.
Leave the zone of influence only by jumping and keeping legs closed.
2. Question
What is a Crane Loader?
One truck-mounted articulated hydraulic crane
A crane consisting of a column rotating on a base, and an arm system attached to the top of the column.
Both are correct
3. Question
If we carry out work near power lines...
The distance shall not be less than 5 metres.
No distance should be left, just avoid touching the power lines.
4. Question
Who is responsible for the general maintenance of the Crane Loader:
Both are correct
Worker
Employer
5. Question
Do we need to know the weight of the load?
Yes, the weight of the load must be known. If there is no data on the load, the load must be calculated and estimated.
Not necessary, although it is recommended to know the weight of the load.
6. Question
In the work area, is it important to maintain the cleanliness of the areas?
Yes, it is necessary to maintain a good state of cleanliness of the areas.
Yes, maintenance will be the responsibility of the cleaning services.
7. Question
What kind of action should we take if the load monitor frequently switches on and off due to a power failure?
Switch off the load limiter.
Stop the manoeuvre and inform the person in charge of the work or activity, complying at all times with safety regulations.
Have the crane serviced by a maintenance company.
Continue the manoeuvre until the manoeuvre is completed.
8. Question
Whose responsibility is it to train the truck hydraulic crane operator?
It is the Labour Inspectorate
It is the worker
It is the employer
9. Question
The emergency stop button is...
This is a safety device which, when activated, blocks all movements of the crane, but it is not mandatory for all control positions.
This is a safety device which, when activated, instantly blocks all movements of the crane and must be installed in all control stations.
10. Question
The Operator shall carry out periodic checks:
Yes, the condition of the machine should be checked daily before use.
No, as manufacturers do not require regular checks.
11. Question
It is the responsibility of the driver:
Knowledge of crane controls, functions and mechanics.
Both are correct
React quickly to visual, auditory or movement aggression.
12. Question
What is a crane mounted on special bases?
One whose base is moved by chains.
One whose base is moved by devices other than wheels or chains.
One whose base is moved by wheels.
One whose base is moved by wheels or chains.
13. Question
What is the stability coefficient?
A loading parameter.
A general parameter.
A dimensional parameter.
A base-related parameter.
14. Question
In the event of an accident at work...
We will look for a partner, to take him to the nearest hospital.
We will need to call an ambulance
The injured person must be transported immediately by crane.
15. Question
There are different types of loader crane assemblies, which are:
Crane mounted behind the cab and Crane mounted in the centre.
Crane mounted behind the cab, Crane mounted at the rear, Crane mounted in the middle.
💬 ¿Necesitas ayuda?
1
WhatsApp
¡Hola! 👋
Nuestro servicio de atención está disponible
24/7
.
Si tienes cualquier consulta,
deja tu mensaje y
te responderemos enseguida
.
Academia Fór-mate
Abrir WhatsApp